- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.
Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
$38.00 - $40.00
Our 12 oz Roaster™ bottle is fit for early mornings. TempLock™ double-wall vacuum insulation keeps chai hot up to 8 hours, coffee on ice for 30 hours, and a bottle of your favorite brew cold for 12 hours. Our patented Roaster™ Cap is insulated and designed for sipping, drinking or chugging. Benefits TempLock™ Double Wall Vacuum Insulation keeps drinks up to 8 hours hot, 30 hours iced and 12 hours cold EarthGrip™ Powder Coat finish is tactile, easy to grip and extremely durable 18/8 Kitchen-Grade Electropolished Stainless Steel doesn't transfer flavor, no metal aftertaste Roaster™ cap is made with multiple layers of ThermaGrid™ waffle insulation to prolong thermal protection BPA-free and phthalate-free Does not sweat Dishwasher safe (hand wash recommended) Leak-free design Patented design Lifetime warranty
It grips the hand and won't let go. Shaped for comfort and finished with our EarthGrip™ textured powder coat paint, this vacuum insulated pint is unabashedly sublime. At the core, our TempLock™ double wall vacuum insulation and electropolished steel preserves taste and keeps favorite brews cold for hours on end, drinks on ice for 24 hrs, and coffee hot for 8 hrs. Includes an insulated lid and silicone cork to keep your drink at optimal temperature. Lid compatible with straws up to 8mm in diameter. TempLock™ double wall vacuum insulation EarthGrip™ powder coat finish is tactile, easy to grip and extremely durable 18/8 kitchen-grade electropolished stainless steel doesn't transfer flavor, no metal aftertaste Silicone cork is an effective splash guard when on the go Accommodates reusable straws up to 8mm in diameter BPA-free and phthalate-free Does not sweat Dishwasher safe (hand wash recommended) ??Patent pending Lifetime warranty
The Matchbox Coupe Cage is designed as a minimalist top-entry cage that features an integrated multi-tool with all the essentials for road biking. The sleek design seamlessly mounts on the downtube or seat tube making the integrated tools almost imperceptible. - Integrated Storage top entry cage - 10 function multitool - Low profile design mounts seamlessly to the downtube or seat tube
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
- Stainless steel cage with a black vinyl coating - 5" Outer diameter cage velcros on any size frame tube or seat post - Will not scratch metal bottles or remove paint - Not recommended for glass - Proudly made in chicago, Illinois
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g
Topeak's iGlowCage will turn your night ride into a wild adventure! Ingenious integration of a super bright RGB LED into our water bottle cage gives you multiple choices of color to illuminate the included clear bottle for 360 degree visibility.
$27.00 - $33.00
TempLock™ Double Wall Vacuum Insulation keeps drinks up to 8 hours hot, 30 hours iced and 12 hours cold EarthGrip™ Powder Coat finish is tactile, easy to grip and extremely durable 18/8 Kitchen-Grade Electropolished Stainless Steel doesn't transfer flavor, no metal aftertaste Roaster™ cap is made with multiple layers of ThermaGrid™ waffle insulation to prolong thermal protection BPA-free and phthalate-free Does not sweat Dishwasher safe (hand wash recommended) Leak free design Compatible with Roaster™, Kewler™, and Kewler™ Opener Cap US Patents D626,414 and D814,236 Lifetime warranty
A harmonious marriage of two classic Blackburn products: a cargo rack and bottle cage in one. Blackburn's Outpost Cargo Cage provides a solution to carrying your oddly-shaped gear along for the ride. - Securely strap down odd size bottles and other gear, such as bags and clothing - Mounts to 2 standard bottle cage bosses - Three sets of mounting holes to fit different size frames - Included silicone-backed webbing straps prevents your cargo from jostling free - 6mm alloy tube construction - 4kgs/8.8lbs carrying capacity - Weight: 164 grams w/ straps
Carrying enough water on longer rides can be a problem. This is especially true for touring cyclists in the southwest as well as parts of the world where potable water sources are far apart. We designed the Mojave cage to fit 32oz Nalgene bottles, 32 oz insulated Klean Kanteen bottles, and 40oz Klean Kanteen stainless steel bottles. The mounting tab has 5 holes to allow you to mount it in three positions, higher or lower as best fits your frame. You can also mount it on newer frames with three water bottle screw bosses. Construction is all stainless steel. One caveat, the Klean Kanteen bottle is pretty tall, about 29cm with the sport-top. It may not fit inside the main triangle of smaller frames. The Nalgene is shorter but doesn't offer a sport-top. Weight is 158 gr. (
- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
The dream of summer is alive and well all year round thanks to this fun little number. Keeps stuff cold when it’s warm out and delays things from freezing during the winter. Pretty handy stuff! These bottles are made in the USA by Specialized using their Purist Technology. - Capacity 23oz - Origin USA
The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides
Modern mountain bikes' fancy suspension and lower standover height have put water bottle cage real estate at a premium, but Blackburn's Wayside Side Entry MTB Cage buys back some space! - Left or Right Handed - This 2 piece system can be installed so that the bottle is able to exit from either the right or left side. No extra hardware is required and the cage installs easily and quickly. - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Standard 65mm center-to-center hole spacing - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 87mm/3.43in - Height 87mm/3.43 - Weight 45 Grams
Lezyne's Alloy Cage is CNC-machined out of aluminum for impressive strength and durability. Its unique rib design holds bottles securely over rough roads and allows for easy in/out, plus the integrated pump mounts holds a Road Drive pump securely.
The Hot Take beverage holder is a super hot take on how to carry a beverage by bike. Designed specifically for use with Kleen Kanteen/Miir/Hydroflask containers. The Hot Take is intended for use with cylindrical shaped vessels, so tall boys fit fine! The bottom strap is adjustable, allowing the Hot Take to accommodate 12-24oz containers. Meticulously constructed of three layers for maximum functionality. The inner layer embraces your beverage with a soft microfiber that won't scratch your container. The outer layer is crafted of a bombproof nylon for long lasting durability, with an elastic band that allows for varying bottle sizes. In between these two layers is a firm but flexible plastic liner that provides rigidity, meaning your Hot Take will never lose its shape. Three points of attachment fasten to your stem, handlebars, and steerer tube for a firm hold, providing carefree riding and sipping. "I've been riding and testing the Hot Take for over a year now and it has become a quintessential part of my commuter. I even jammed a bottle of wine in there once!" - PDW Co-founder Erik Olson
The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.