Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Campagnolo Chorus EPS V2 Power Unit
$365.00
The EPS Power Unit is the brain of the entire EPS system. The power unit input/output gate charges the battery and updates the firmware. The unit checks and manages the battery pack, interacts with the interface, drives the front and rear derailleurs, and displays system anomalies through an acoustic buzzer and RGD light. EPS V2 Power Units are for internal battery applications, under bottom bracket, or under chain stay mounting options and require the specific EPS V2 Interface. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1 meter for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Stages Cycling Replacement 30mm Spindles
$70.00 - $299.99
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with many SRAM BB30 road and SRAM BB30 mountain bike drive side cranks, as well as SRAM DUB MTB, Race Face Next SL and Specialized S-Works Road. The Stages Power meter 30mm spindles are specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retro fit of the new carbon Stages Power Meter to a rider's SRAM and Race Face drivetrain. Stages Cycling BB spindles are available in six options: A) SRAM Red 22 BB30 B) SRAM Force 22, Rival 22, Force/Rival CX1 C) 2015MY SRAM BB30 mountain cranks - 9mm spacer* D) 2015MY SRAM BB30 mountain cranks - 15.5mm spacer* E) Race Face Next SL - 168mm q factor F) Specialized S-Works Road - 2017/2018MY G) SRAM DUB MTB * Not compatible with 156mm Q-factor
Zipp CeramicSpeed Bearing Kit: 30/60 88 Front Hub, 188 Rear Hub, and 30/60/S9 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings
Zipp CeramicSpeed Bearing Kit: 30/60 Rear Hub
$276.00
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 188v9, 30 and 60 rear hubs
Zipp CeramicSpeed Bearing Kit: For Sub-9/Super-9 Hub
$276.00
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
Zipp CeramicSpeed Bearing Kit: Modified For 177 Rear Hub
$276.00
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Zipp CeramicSpeed Bearing Kit: Modified For 77 Front Hub and 177 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
Profile Design T3+ Carbon Clip-on Aerobars
$238.00 - $264.99
Profile's T3+ Carbon Aerobars feature length, width and arm-rest adjustment so you can easily achieve the perfect aero tuck. These fast, lightweight bars also include internal cable routing to give you another edge over your competition, whether you're racing others or your own personal record.
Zipp Vuka Clip Aerobar with Vuka Carbon Extensions
$250.00
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in high-performance carbon fiber, in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance. - Diameter: 31.8 - EVO 70/110: Weight: 480g, Length: 360mm - Race: Weight: 480g, Length: 330mm
Profile Design Supersonic Ergo 35c
$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort. With the 35c extensions, this aerobar is suited to riders who wish to adopt an aerodynamic arrowhead hand position. Performance - The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. Origin The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. The Ergo armrest is an integral part of the overall adjustability scheme. The dual-offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 35c extensions offer a 35 deg ski bend shape. This facilitates a slightly turned-down wrist position to create a streamlined hand position. They are 400mm long and can be cut to size to suit nearly ever rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
Profile Design Supersonic Ergo 4525c
$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme.The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 4525c extensions offer a 45 deg lower and 25 deg upper section with a 7.5mm lateral shift per side. This allows the rider to choose between a low, short reach position or a high hands, stretched position for aerodynamics. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
Profile Design Supersonic Ergo 50c
$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The Supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme. The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 50c extensions offer a 50 deg ski bend shape with a 7.5mm (per side) lateral shift. This allows a neutral wrist angle with the capability to fine tune the grip width. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
Campagnolo Record EPS V2 Interface Unit
$200.00
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
SRAM AXS RockShox Seatpost Controller
$200.00
The RockShox AXS controller ushers in the next generation of a clean cockpit with a completely cable-free design. With the touch of a button, operate the new Reverb AXS seatpost with less effort than ever before. Open up all the possibilities with AXS. - AXS app lets you customize configurations, monitor battery levels, update firmware and much more for all RockShox and SRAM AXS enabled components - Compatible with Matchmaker X - System is completely water and dust proof to IP69K
Shimano Dura-Ace Di2 Electronic External Rear Wiring Kit
$185.00
Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.
Shimano Dura-Ace Di2 Electronic Front Wiring Kit (for use w/o Flight Deck Computer)
$91.00 - $169.99
Shimano's Dura-Ace Di2 takes shifting to the next level. The Front Wiring Kit connects to both the left and right shifters and includes the Junction Box A (which displays battery power and allows manual adjusting). It's for use without the Flight Deck Computer.
MRP Mega G4
$169.95
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells) - 204g (Mega Alloy ISCG)
Profile Design 35c Carbon Extensions
$166.99
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 262g/pair
Profile Design 4525c Carbon Extensions
$166.99
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 45/25c is a 45° / 25° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - The 45/25c extensions have a first section at 45° and the grip at 25°. The rider can choose whether to hold high for the shrugged position or low for a more open, head up position. - The 45/25a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin - Recent trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 45/25c as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 242g/pair
Profile Design Airstryke II
$160.00
The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g
Wheels Manufacturing Inc. 1-1/8-inch Headset Spacer Kit
$160.00
105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer Kit
$160.00
- Black carbon fiber weave headset spacers for tuning ride height, no logos - Kit includes 1-1/8" spacers: (15) 2.5mm, (25) 5mm, (16) 10mm, (2) 15mm, (4) 20mm
Zipp Vuka Carbon Extensions
$160.00
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo 70 and 110 extensions Vuka Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is now available for the first time in carbon, allowing for even more complex shaping and lighter weight. Vuka Race Carbon Extension The Vuka Race Carbon Extension was designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Compatible with Vuka Clip, Vuka Aero and all 22.2 systems - Internal cable routing
Profile Design Sonic Ergo 35a
$159.99
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Profile Design Sonic Ergo 4525a
$159.99
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine tune a riders position or match the position from their previous aerobar or bike. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Profile Design Sonic Ergo 50a
$159.99
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top-level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. - The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine-tune a riders position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 50a extensions offer a 50° ski bend shape. The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Vision Team Clip-Ons
$159.99
Get ready to get fast with Vision's Team Clip-Ons. The butted-aluminum J-bend extensions are light and stiff, plus they feature fully internal cable routing. You'll also love the 3-position carbon arm rests with supportive foam pads for dialing in your ideal aero position.
MRP 2x Dual Ring Chain Guide
$150.00 - $159.95
- Shiftable guide for SRAM and Shimano 2X cranks - Patented removable skid - Dual 9t sealed-bearing pulley design for superior chain management - BB, ISCG and ISCG-05 mounting options, 136g
Wheels Manufacturing Inc. 5mm Zinc Plated Steel Fastener Kit
$154.50
- Zinc plated for durability - All screws grade 12.9 - 475 Pieces Kit contains: - M5 X 10 Button Head qty. 20 - M5 X 12 Button Head qty. 20 - M5 X 16 Button Head qty. 20 - M5 X 12 Socket, Zinc qty. 35 - M5 X 16 Socket, Zinc qty. 35 - M5 x 20 Socket, Zinc qty. 15 - M5 X 25 Socket, Zinc qty. 10 - M5 X 30 Socket, Zinc qty. 10 - M5 X 12 Flat Socket Head, Spd qty. 25 - M5 X 16 Flat Socket Head, Spd qty. 25 - M5 X 8 Flat Socket, Zinc qty. 20 - M5 Nut qty. 50 - M5 Nylock Nut, Zinc qty. 40 - M5 Acorn Nut, Zinc qty. 10 - M5 Flat Washer qty. 65 - M5 Oversized Flat Washer qty. 25 - M5 Lockwasher qty. 25 - M5 Toothed, Zinc qty. 25
FSA BB30 Ceramic Bearing Set
$152.99
Upgrade your BB30 bottom bracket to the long-lasting smoothness of FSA Ceramic Bearings. Lighter and harder than steel, ceramic bearings can reduce friction, increase durability, and lighten your bike. What's not to like?
Profile Design Evo Bracket Kit
$149.99
The Evo bracket allows you to upgrade an existing Aeria bar with a massively increased fit range as well as built in tilt. It is compatible with the existing spacer kit and armrests. Compatible Aerobars - Profile Design Aeria T2 and T4 Carbon and Aluminum version - BMC TM01 TT cockpit - Parlee TTiR cockpit Non-Compatible Aerobars - Scott Plasma 5 TT4 aerobars - Please note that it must not be fitted to a Scott Plasma 5 as the bar was not designed for this style of bracket.
Profile Design Subsonic Race 35a
$149.99
The Subsonic/Race/35a aerobar combines the low stack Subsonic bracket with the arm-hugging Race armrest to offer an industry-leading fit range oriented towards low, narrow positions. The 35a extension offers a comfortable 35 degree angle with a 80mm rise. This is the only low stack clip-on in the market that maintains the pad-to-grip angle as the bar is stacked up Subsonic is not just another aerobar bracket. It brings our next-generation fit range to a low stack bracket design. This allows the bar to use our riser kits to increase the stack without changing the relationship between the armrest and the grips. The Race armrest has been designed to tightly cup the riders arms – facilitating a narrow position and increasing control at speed. Performance - The Subsonic/Race is designed to achieve a lower stack height than standard aerobars, without the added frontal area of a below-the-basebar extension clamping system. This improves aerodynamics and the fit range. Fit Data - Armrest offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 142mm to 272mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: The minimum is 40mm and the bracket is compatible with our existing risers which add up to 70mm of stack in 5mm increments. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1200 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable low stack clip-on on the market. Origin Story After we released the Supersonic (J5) as a premium bracket with market leading fit options and verstility we wanted to bring the same kind of options to teh rest of our range of brackets and thus aerobars. Where our supersonic and Sonic brackets have a minimum stack of around 60mm, like most of the popular aerobars - we wanted the Subsonic to offer a substantially lower position. This helps the segment of the market who struggle to get into their ideal position with modern bike frames. And it was vital that we include stack height adjustment without altering the pad grip relationship - so our riders have the ability to fine-tune every aspect of their setup. The Race armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrest, smaller increments of movement are achieved - making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Additionally, there are two thicknesses of cushion available to ensure a snug fit for different sized arms. Who is it for - This bar is perfect for riders who wish to achieve lower positions than are possible with standard aerobar designs. Unlike other low stack bars, it allows fine-tuning of the stack height so the rider is not limited to only one armpad height. With the Race armrests fitted, it is tailored towards riders who intend to be low and narrow to punch the smallest possible hole through the wind. - Bracket: Subsonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Race / 5mm Pads - Extension Length: 350mm - Width: 142mm to 272mm - Weight: 590g
Campagnolo Super Record/Record EPS Under Seat Cable Kit
$140.00
- EPS under-seat shifter cable kit
Zipp Vuka Clip Aerobar with Vuka Alumina Extensions
$140.00
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in affordable aluminum in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance.
Vision Mini TT Clip-On Bar
$139.99
- Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved) - Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads
Shimano Di2 Battery Charger
$102.00 - $131.00
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Cane Creek VALT Spring
$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Wheels Manufacturing Inc. Drivetrain Spacer Kit
$128.75
Comprehensive shop kit for bottom bracket and cassette/freewheel spacing need. 139 pieces in a durable plastic storage box. Kit includes: - (20) 1.0mm FW Spacers - (10) 1.5mm FW Spacers - (10) 2.0mm FW Spacers - (10) NCS-4.5mm Cassette Spacers - (10) SHIM-.3MM Spacers - (10) SHIM-.5MM Spacers - (8) 0.5mm 24mm ID Spacers - (8) 1.0mm 24mm ID Spacers - (8) 2.5mm 24mm ID Spacers - (4) BB30-CLIPs - (4) BB30/PF30 Wave Washers - (4) GXP Wave Washers - (4) .7mm Bottom Bracket Spacers - (4) 1.8mm Bottom Bracket Spacers - (9) 2.5mm Bottom Bracket Spacers - (8) 0.5mm 30mm ID Spacers - (8) 1.0mm 30mm ID Spacers
Profile Design Subsonic Bracket Kit
$126.99
The bracket is forged to create a sleek low stack design. It offers significantly lower stack than the rest of the Sonic range while retaining the extension reach and width adjustment options. It is compatible with a 31.8mm basebar, our riser kits, and 22.2mm extensions in aluminum and carbon. - Materials: Forged 6061-T6 AL - Stack Height: 23.5mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 352g
Campagnolo Chorus EPS Interface
$125.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated) - Compatible only with the Chorus Power Unit
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$121.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Profile Design J4 Bracket Kit
$109.99
Profile Design's J4 Bracket Kit lets you fine-tune your aero position down to the millimeter. For lightness, strength and aerodynamics, the brackets are made of forged and CNC-machined 6061 aluminum and have Marine-quality 12.9-grade bolts that are corrosion-resistant and hidden. For easy and fast adjustability, by simply loosening the fixing bolt on each side you can slide your extensions in and out. Meanwhile, the brackets hold the armrests set back 20mm from the center of the base bar or you can reverse the armrests for a forward position. You can also stack aftermarket risers on the brackets to raise the armrests (armrests, risers and extensions sold separately).
Wheels Manufacturing Inc. Retainer Bearing Kit
$103.00
- Includes stock replacement retainers for headsets, bottom brackets and hubs - Headsets: (8) 5/32"x22, (8) 5/32"x16, (8) 3/16"x15, (24) 5/32"x20; - Bottom brackets: (12) 1/4"x9, (16) 5/16"x9, (16) 5/16"x10 - Hubs: (8) 3/16"x7, (16) 1/4"x7
Giant Propel Advanced ISP Seat Clamp
$100.00
-Seatpost clamp for Propel Advanced ISP models (2013-2016)
SRAM All-Mountain Carbon Chainring Guard
$100.00
SRAM X01 Chainring Guards - Material: Polycarbonate - Chainring BCD: 94 - Mount Type: Chainring
Salsa Pivot Service Kit - Bucksaw
$100.00
Salsa Pivot Service Kits
Salsa Split Pivot Service Kits
$100.00
Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.
Jagwire 5G Tube Tops
$10.99 - $99.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.
K-Edge CX Chain Guide
$99.99
The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Wheels Manufacturing Inc. Chainring Spacer Kit
$92.75
This assortment of chainring spacers contains 120 pcs. in a clear plastic storage box. Kit includes: - (20) 0.6mm - (20) 1.2mm - (5) 2mm - (5) 3.8mm - (5) 2.2mm - (5) 3mm - (5) 3.5mm - (10) 4mm - (10) 4.3mm - (10) 4.6mm - (10) 5mm - (5) 5.3mm - (5) 7.1mm - (5) 8.3mm
Paul Component Engineering Melvin Chain Tensioner
$90.00
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
Profile Design Legacy II Aluminum Aerobar
$89.99
Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
Ritchey Break-Away Downtube Hinge Clamp
$17.00 - $89.95
Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 45.0mm Hinge clamp compatible with boom tube of Break-Away Tandem
SRAM XX1 Eagle Ceramic Bearing Pulleys and Inner Cage
$88.00
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
Campagnolo EPS Front Derailleur Stiffener
$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Profile Design F-40a Alloy Armrest Kit
$84.99
The F40 Armrest was designed in combination with the Aeria Ultimate to offer a massive adjustment range in a simple solution. Creative engineering and design have yielded a strategic offset bolt pattern offering a 67.5mm fore/aft adjustment range at 7.5mm steps between each position and a 92.5mm width adjustment range at 18.5mm steps between each position. Upgrading any of Profile's T+ Carbon Aerobar Systems to the F40 armrest will increase the range of adjustability by 31%, offering 42 unique armrest positions. - Armrest Material: 6061-T6 AL - Armpad Material: EVA Closed Cell Foam - Compatibility: J2/J3/J4/J5/L1/L2/Aeria/Aeria Ultimate - Size: 122mm x 84mm - Stack: 19mm (w/Standard Pad) - Reach Adjustment: 7.5mm Increments - Width Adjustment: 18.5mm - Rotation Adjustment: +/- 7.5 - Weight: 175g
Profile Design Flip-Up Bracket Kit
$84.99
Flip-up armrest leaving the base or drop bar clear for riding with your hands on the flat section of the handlebar. - Construction: 6061-T6 Forged Aluminum - Stack Height: 24mm - Width Adjustment: 37mm - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 242g
Profile Design Sonic Bracket Kit
$84.99
The forged aluminum bracket offers solid, easy-to-use construction alongside an industry-leading fit range. It is also compatible with our riser kits. The bracket is designed for 31.8mm bars and 22.2mm extensions in aluminum or carbon. - Materials: Forged 6061-T6 AL - Stack Height: 42.6mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 234g
Page 1 of 15 Next page