Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Ritchey Break-Away Downtube Hinge Clamp
$17.00 - $89.95
Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 45.0mm Hinge clamp compatible with boom tube of Break-Away Tandem
Origin8 Clamp-On Double Cable Stop
$9.00
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Origin8 Quill Adapter
$17.60 - $22.00
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
Giant Propel Advanced ISP Seat Clamp
$100.00
-Seatpost clamp for Propel Advanced ISP models (2013-2016)
Stages Cycling Replacement 30mm Spindles
$70.00 - $299.99
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with many SRAM BB30 road and SRAM BB30 mountain bike drive side cranks, as well as SRAM DUB MTB, Race Face Next SL and Specialized S-Works Road. The Stages Power meter 30mm spindles are specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retro fit of the new carbon Stages Power Meter to a rider's SRAM and Race Face drivetrain. Stages Cycling BB spindles are available in six options: A) SRAM Red 22 BB30 B) SRAM Force 22, Rival 22, Force/Rival CX1 C) 2015MY SRAM BB30 mountain cranks - 9mm spacer* D) 2015MY SRAM BB30 mountain cranks - 15.5mm spacer* E) Race Face Next SL - 168mm q factor F) Specialized S-Works Road - 2017/2018MY G) SRAM DUB MTB * Not compatible with 156mm Q-factor
Ritchey Carbon 1-Bolt Seatpost Clamp
$16.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Carbon 1-bolt posts to various saddle rail dimensions. - 8x8.5mm or 7x9.6mm available
RockShox Reverb Stealth Inner Seal Head, B1
$38.00
RockShox Reverb Internals include seal head with bushings, O-rings, wiper seal, retaining ring
All-City Tensioner Bolts
$10.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
Origin8 Classique Sport SS Seat Clamp
$25.00 - $27.58
Origin-8's Classique Sport SS Seat Clamp is forged from stainless steel for strength, durability, a great look and rust prevention. It features cutouts that add style and reduce the weight and it comes with a stainless Allen bolt.
Problem Solvers Backstop
$18.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
Problem Solvers Direct Mount Adapter
$37.00 - $50.00
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
Problem Solvers Seat Binder Bolts
$10.00
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
Origin8 Seat Clamp
$8.00
Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight
Sunlite Seatpost Plate Nut
$2.00
- M8 Top Plate Nut
Shimano Deore XT M8000 Rear Derailleur Pulley Set
$19.00
Shimano Rear Derailleur Pulley Assemblies
Dimension Steerer Extender
$36.00 - $43.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
KMC Half Link Adapter
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Sunlite Rack Seat Clamp
$13.00
• Aluminum clamp • Built-in rear rack mount
KMC Missing Link 10-DLC
$16.00
- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs
Surly Thru Axle
$30.00 - $33.00
Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.
Wheels Manufacturing Inc. Derailleur Hanger 122
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 63
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 153
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/4-inch
$8.24
This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.
Wheels Manufacturing Inc. Derailleur Hanger 102
$25.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 215
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 115
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 54
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 28
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 94
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (bolt only)